Pre- and post-production — Energy Use in Peru

Peru: Pre- and post-production — Energy Use was 24,540 TJ in 2023. ◆ Volatile

Latest (2023)
24,540 TJ
Change on year
unchanged
World rank
61st
of 200 countries
All-time high
26,547 TJ
in 2019
All-time low
3,988 TJ
in 1994
Years of data
34
1990–2023

Pre- and post-production — Energy Use in Peru, 1990–2023

5.0k10.0k15.0k20.0k25.0k1990200620231990: 4.3k TJ1991: 4.8k TJ1992: 4.7k TJ1993: 4.3k TJ1994: 4.0k TJ1995: 4.8k TJ1996: 5.1k TJ1997: 5.3k TJ1998: 5.4k TJ1999: 5.5k TJ2000: 5.8k TJ2001: 6.1k TJ2002: 6.4k TJ2003: 6.7k TJ2004: 7.3k TJ2005: 7.9k TJ2006: 8.8k TJ2007: 9.9k TJ2008: 9.8k TJ2009: 18.4k TJ2010: 19.2k TJ2011: 21.2k TJ2012: 21.7k TJ2013: 22.7k TJ2014: 23.0k TJ2015: 24.6k TJ2016: 25.3k TJ2017: 25.9k TJ2018: 25.6k TJ2019: 26.5k TJ2020: 24.2k TJ2021: 26.3k TJ2022: 24.5k TJ2023: 24.5k TJ

Source: Food and Agriculture Organization of the United Nations. Measured in TJ.

Analysis

The most recent figure for pre- and post-production — energy use in Peru is 24,540 TJ, measured in 2023.

Compared with earlier readings it is up 7.9% over ten years.

Over the whole period, pre- and post-production — energy use in Peru peaked at 26,547 TJ in 2019 and was at its lowest, 3,988 TJ, in 1994.

Peru ranks 61st of 200 countries on this measure, in the middle of the range.

The series is highly variable year to year, so single readings are best treated with caution.

Averages by decade

DecadeAverage LowestHighest Years
1990s 4,811 TJ 3,988 TJ 5,459 TJ 10
2000s 8,713 TJ 5,811 TJ 18,436 TJ 10
2010s 23,583 TJ 19,216 TJ 26,547 TJ 10
2020s 24,888 TJ 24,218 TJ 26,256 TJ 4

Countries ranked near Peru

  1. 58 Ireland 25,826 TJ compare
  2. 59 Hungary 25,450 TJ compare
  3. 60 Romania 25,450 TJ compare
  4. 62 Dominican Republic 23,211 TJ compare
  5. 63 Libya 22,385 TJ compare
  6. 64 Bulgaria 22,235 TJ compare

See the full ranking of 236 places →

More climate change data for Peru

All data for Peru →

Frequently asked questions

What is pre- and post-production — energy use in Peru?
Pre- and post-production — energy use in Peru was 24,540 TJ in 2023, according to Food and Agriculture Organization of the United Nations.
What is the highest pre- and post-production — energy use recorded in Peru?
The highest recorded value was 26,547 TJ in 2019.
What is the lowest pre- and post-production — energy use recorded in Peru?
The lowest recorded value was 3,988 TJ in 1994.
How does Peru rank for pre- and post-production — energy use?
Peru ranks 61st out of 200 countries with data for 2023.
Is pre- and post-production — energy use rising or falling in Peru?
Over the last ten years it is up 7.9%. The long-run trend across the full record is volatile.
Where does this Peru data come from?
The figures come from Food and Agriculture Organization of the United Nations, published as part of Pre- and post-production — Energy Use (Electricity). Statizoid updates them automatically from the source API.

Download this data

CSV · JSON — 34 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).

About this data

Indicator
Pre- and post-production — Energy Use (Electricity)
Unit
TJ
Source
Food and Agriculture Organization of the United Nations
Licence
CC BY-NC-SA 3.0 IGO (FAO)
Coverage
236 places, 7,746 data points, 1990–2023
Last refreshed

The FAOSTAT domain on Emissions from Pre- and post- agricultural production includes the greenhouse gas (GHG) emissions, and related activity data, generated from pre- and post-agriculture production stages of the agri-food systems. Data are computed following the Tier 1 methods of the Intergovernmental Panel on Climate Change (IPCC) Guidelines for National greenhouse gas (GHG) Inventories (IPCC, 1996; 1997; 2000; 2002; 2006; 2014). The domain includes methane (CH4), nitrous oxide (N2O), carbon dioxide (CO2) and CO2 equivalent (CO2eq) emissions from the above activities as well as the aggregate fluorinated gases (F-gases) emissions. Estimates are available by country, with global coverage and are updated annually.The FAOSTAT domain disseminates information estimates of CH4, N2O, CO2 emissions, F-gases, their aggregates in CO2eq in units of kilotonnes (kt, or 10^6 kg), and the underlying activity data. CO2eq emissions are computed by using the IPCC Fifth Assessment report global warming potentials, AR5 (IPCC, 2014). Data are available for most countries and territories, for standard FAOSTAT regional aggregations, and for Annex I and non-Annex I country groups.